1. Belt polishing, driven by motorized spindle, rated speed of motorized spindle is 3000 R / min, rated linear speed of belt is 32m / s, and polishing efficiency is about 2.5 times that of ordinary belt.
3. The polishing speed, belt preload, belt preload and other operating parameters are displayed on the control interface and adjustable to realize the parametric control of polishing process.
3. After the process preparation and debugging is completed, the process documents will be automatically generated, which can be saved to the U disk, computer and other memory according to the number. When necessary, the input equipment will be transferred out to save the process preparation and debugging time, and at the same time, the consistency of the process effect of the same batch of products can be ensured.
4. Integrate polishing and wax spraying function to realize the integration of polishing and waxing.
5. In the process of automatic polishing, the hood is closed, and the dust generated by polishing is recovered by the secondary water curtain. The water filtration circulating system and air filtration system of the equipment control the polishing dust to be cleaned and recovered in the closed space, which solves the environmental protection problem of polishing work. The polishing process can also be carried out in the ordinary workshop.
Equipment parameters:
|
Main technical parameters |
|
|
Equipment type |
MP3000 |
|
Length of workpiece processed |
200-3000mm |
|
Maximum travel speed |
240mm/s |
|
Pitch range |
可自由設定 |
|
Helix angle |
可自由設定 |
|
Rated speed |
3000r/min |
|
Maximum speed |
5500r/min |
|
Rated line speed |
32m/s |
|
Maximum linear speed |
58m/s |
|
Polishing wheel diameter range |
150mm-250mm |
|
Outline size |
4500mmx2000mmx2500mm |
|
Filter size |
1800mmx1200mmx600mm |
|
Power Supply |
380V, 功率：6.5KW |
|
Gas source |
0.5-0.7MPa, 15L/min |
Previous:Vertical honing machine Next:No Data
